CLion Debugging

This guide will help with setting up CLion for remote debugging through dcload's GDB feature.

Setup

The following criteria must be met before following this guide:

• The specific project must be setup within CLion
• A working version of dcload-ip or dcload-serial must be available on the host system
• The target Dreamcast will need either a Broadband adapter, LAN adapter, or a Coder's cable (USB or serial cable) connected
• SSH must be configured for remote logins on the host system

Creating a debug configuration

After opening your project in CLion, click the dropdown for the current debug/run configuration and select "Edit Configurations...":

In the configuration editor window, select the + icon to create a new configuration and select "Embedded GDB Debugger":

Embedded GDB Server Settings

Now that the new configuration has been created, the specific settings can now be populated to enable debugging sessions.

Use the following settings in the debug configuration page:

• Name: Dreamcast Debug IP/Serial (really, it's up to the user)
• Target: Your project
• Executable binary: Your executable for your project
• GDB: Bundled GDB (This can handle SH-4 executables)
• Download Executable: Never
• 'target remote' args: localhost:2159 (default port for dcload's GDB instance)
• GDB Server: /path/to/dc-tool-[ip|serial]
• GDB Server args: -g -x $CMakeCurrentBuildDir$/<your executable name>.elf -c $ContentRoot$ -t <IP address or /dev/tty device>

• -g: Starts dcload with GDB
• -x: Uploads and executes your binary
• -c: Points dcload to your project directory to be able to load files with "/pc/" (requires superuser)
• -t: The device dcload should target

• Advanced GDB Server Options

• Run with root privileges: Checked

Once all settings have been configured, click "Apply" and the configuration should be ready.

Using the Debugger

Now that the Embedded GDB Server has been configured, the executable can be launched. To launch a binary on the Dreamcast, make sure it is powered on and dcload-ip/serial has been booted and connected to the computer. Once the Dreamcast is ready to receive a new binary, click on the "bug" icon in the toolbar of CLion:

This will compile any changes and generate a new .elf file and launch dc-tool-[ip/ser] with the correct flags. The desired binary should be deployed to and launched on the Dreamcast at this point. The dc-tool-* binary should now be waiting for a GDB connection. CLion will launch GDB and connect to the waiting GDB server. Once CLion connects, a debug session will be started in the CLion user interface.

Creating breakpoints

Creating breakpoints in CLion is as easy as a single click. To set a breakpoint, hover over a line number within a file and a small red circle will appear. The specific line the program should stop at can be clicked: