F1 fuse repair: Difference between revisions

From dreamcast.wiki
Jump to navigation Jump to search
(I took measurements of the resistors on the controller port and went and tried to match them with actual part numbers.)
m (spurious period)
Line 3: Line 3:
<br>
<br>
<br>
<br>
The stock part, despite being labelled as a fuse, most closely resembles a 1/4 W, 0.39 Ω ± 10% metal film resistor. Various electronics component retailers sell part number MFR-25FTF52-0R39 by Yageo, which matches these specifications. (it is actually a little bit better, and as of January 2020 it costs less then $9 USD for 100 of them). Note the green band on F1 actually represents a temperature coefficient, specifically indicating a value of 20 ppm/K--that is, for every 1 K increase in temperature, the resistance may change by roughly 20 parts per million.
The stock part, despite being labelled as a fuse, most closely resembles a 1/4 W, 0.39 Ω ± 10% metal film resistor. Various electronics component retailers sell part number MFR-25FTF52-0R39 by Yageo, which matches these specifications (it is actually a little bit better, and as of January 2020 it costs less then $9 USD for 100 of them). Note the green band on F1 actually represents a temperature coefficient, specifically indicating a value of 20 ppm/K--that is, for every 1 K increase in temperature, the resistance may change by roughly 20 parts per million.
<br>
<br>
<br>
<br>

Revision as of 17:13, 17 January 2020

A blown Dreamcast F1 fuse resistor

The Dreamcast's controller board contains a fuse labelled F1 that can blow and cause the console's controller ports to no longer function. This fuse can be replaced by an automatically resetting fuse that will revert back to a functioning state within a few moments.

The stock part, despite being labelled as a fuse, most closely resembles a 1/4 W, 0.39 Ω ± 10% metal film resistor. Various electronics component retailers sell part number MFR-25FTF52-0R39 by Yageo, which matches these specifications (it is actually a little bit better, and as of January 2020 it costs less then $9 USD for 100 of them). Note the green band on F1 actually represents a temperature coefficient, specifically indicating a value of 20 ppm/K--that is, for every 1 K increase in temperature, the resistance may change by roughly 20 parts per million.

R1, the other resistor on the Dreamcast controller board, is a standard 1/2 W, 13 Ω ± 5% resistor matched by Yageo-branded part number MFR50SFTE52-13R.

This page is a stub page. It needs to be expanded with more detail. If you know more information about this topic, please sign up and contribute to dreamcast.wiki!