Coder's cable
Jump to navigation
Jump to search
The coder's cable is the name given to the serial-based cable some developers use to test and debug code during development. Originally, cables were connected to host devices via serial, but modern cable designs incorporate a USB controller instead. Coder's cables can also be used for other purpose's besides development, such as transferring VMU data back to a PC or dumping GD-ROMs (although quite slowly).
- Using the Dreamcast's clock:
- These baud rates should work with most systems/cables: 38400, 57600, 115200, 230400. (eg: lik-sang cable)
- These baud rates need a good cable: 500000, 781250, 1500000. (eg: retroonyx cable)
- Specifying non-standard baud rates like 781250 might be tricky/impossible for most programs. This should work:
- picocom -b 781250 -d 8 -y n -p 1 /dev/ttyUSB0
- Using an external clock (SCK pin): (TODO)
This page is a stub page. It needs to be expanded with more detail. If you know more information about this topic, please sign up and contribute to dreamcast.wiki!