Coder's cable: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (corrected info on CP2102N's max baud speed, and added some indication as to attaignable speeds) |
||
Line 13: | Line 13: | ||
*** FDTI's '''FT232R'''-like chips: | *** FDTI's '''FT232R'''-like chips: | ||
**** '''good until 781250''', does not support 1562500. | **** '''good until 781250''', does not support 1562500. | ||
**** 500000 and 1500000 will not work with all chips/on all pc, | **** 500000 and 1500000 will not work with all chips/on all pc, because of a 4% baud rate mismatch with the baudrates of the Dreamcast. | ||
***** even if you're lucky, you won't really get 1500000-worthy speeds - more probably around 130-150 kByte/sec... | |||
*** [https://www.silabs.com/interface/usb-bridges/usbxpress Silicon Labs '''CP2102N''']: | *** [https://www.silabs.com/interface/usb-bridges/usbxpress Silicon Labs '''CP2102N''']: | ||
**** under review, | **** under review, supports 1600000, which is a 2,4% baudrate mismatch with the Dreamcast, which seems acceptable for high speeds. Early tests give speeds of 180-210 kByte/sec. | ||
**** eg [https://www.adafruit.com/product/5335 Adafruit CP2102N Friend] | **** eg [https://www.adafruit.com/product/5335 Adafruit CP2102N Friend] | ||
**** eg [https://www.silabs.com/development-tools/interface/cp2102n-mini-development-kit?tab=overview Silicon Labs CP2102N-MINIEK] | **** eg [https://www.silabs.com/development-tools/interface/cp2102n-mini-development-kit?tab=overview Silicon Labs CP2102N-MINIEK] |
Revision as of 15:04, 4 July 2023
The coder's cable is the name given to the serial-based cable some developers use to test and debug code during development. Originally, cables were connected to host devices via serial, but modern cable designs incorporate a USB controller instead. Coder's cables can also be used for other purpose's besides development, such as transferring VMU data back to a PC or dumping GD-ROMs (although quite slowly).
How to build/buy a cable
- Buy:
- eg retroonyx cable, FTDI-based cable.
- Build:
- DC serial connector:
- best connector today is the one used by the DC SD Adapter V2 (+- 16 USD)
- DC serial connector:
- select a usb-to-serial chip/cable (+- 10 USD)
- FDTI's FT232R-like chips:
- good until 781250, does not support 1562500.
- 500000 and 1500000 will not work with all chips/on all pc, because of a 4% baud rate mismatch with the baudrates of the Dreamcast.
- even if you're lucky, you won't really get 1500000-worthy speeds - more probably around 130-150 kByte/sec...
- Silicon Labs CP2102N:
- under review, supports 1600000, which is a 2,4% baudrate mismatch with the Dreamcast, which seems acceptable for high speeds. Early tests give speeds of 180-210 kByte/sec.
- eg Adafruit CP2102N Friend
- eg Silicon Labs CP2102N-MINIEK
- eg DSD TECH SH-U09BL USB to TTL Serial Cable with CP2102N Chip
- FDTI's FT232R-like chips:
- select a usb-to-serial chip/cable (+- 10 USD)
- connect the following pins (cfr Serial_interface):
- GND <-> GND
- TXD <-> RXD
- RXD <-> TXD
- RTS <-> CTS
- CTS <-> RTS
- connect the following pins (cfr Serial_interface):
Software to use
Supported Baud Rates
Not all common baudrates work, so the recommendations are:
- up until 115200, you can use the common baudrates: 9600, 19200, 38400, 57600, 115200
- if 115200 does not work, you can add the "-e" speedhack option
- higher baudrates:
- try first with the dreamcast-specific baudrates (223214, 260416, 312500, 390625, 520833, 781250, 1562500)
- 230400: use the -e speedhack option if you absolutely need 230400 at pc-side, but the DC will use 223214 or 260416 anyways.
- 500000 and 1500000: you can try, but that will not work on all pc (the mismatch with the baudrate of the Dreamcast is sometimes too big (4%))
This page is a stub page. It needs to be expanded with more detail. If you know more information about this topic, please sign up and contribute to dreamcast.wiki!