Coder's cable

The coder's cable is the name given to the serial-based cable some developers use to test and debug code during development. Originally, cables were connected to host devices via serial, but modern cable designs incorporate a USB controller instead. Coder's cables can also be used for other purpose's besides development, such as transferring VMU data back to a PC or dumping GD-ROMs (although quite slowly).

Buy a pre-made cable

• eg: Contact darc on the DCEmulation Forums or Simulant Discord for a pre-made CP2102N-based cable
• eg: retroonyx cable, FTDI-based cable.
• (only mentioned for historical purposes - not sold anymore since long - "Lik-Sang coder's cable" - max speed of 781250)

Build your own cable

• DC serial connector:
  • best connector today is the one used by the DC SD Adapter V2 (+- 20 USD)

DC SD Adapter V2

• select a usb-to-serial chip/cable (+- 15 USD)
  • Silicon Labs CP2102N:
    • Supports 1600000, which is a 2,4% baudrate mismatch with the Dreamcast, which seems acceptable for high speeds. Best chip that can be recommended today. Tests give speeds of 170-190 kByte/sec and more thanks to compression.
    • eg Adafruit CP2102N Friend (USB-C)
    • eg Silicon Labs CP2102N-MINIEK (mini USB)
    • eg DSD TECH SH-U09BL USB to TTL Serial Cable with CP2102N Chip
    • eg Colton's custom PCB - Kicad files to order a custom PCB with a CP2102N, to be soldered to the serial connector of a DC SD Adapter V2

• • FDTI's FT232R-like chips:
    • good until 781250, does not support 1562500.
    • 500000 and 1500000 will not work with all chips/on all pc, because of a 4% baud rate mismatch with the baudrates of the Dreamcast.
      • Even if you're lucky, you won't really get 1500000-worthy speeds - more probably around 130-150 kByte/sec...

• connect the following pins (cfr Serial_interface):
  • GND <-> GND
  • TXD <-> RXD
  • RXD <-> TXD
  • RTS <-> CTS
  • CTS <-> RTS

Software to use

Dcload-serial

Supported Baud Rates

Not all common baudrates work, so the recommendations are:

• up until 115200, you can use the common baudrates: 9600, 19200, 38400, 57600, 115200
  • if 115200 does not work, you can add the "-e" speedhack option
• higher baudrates:
  • try first with the dreamcast-specific baudrates (223214, 260416, 312500, 390625, 520833, 781250, 1562500)
    • Disclaimer for Linux only: needs dc-tool-ser (host) changes from 4 september 2023 to select custom baudrates
    • Disclaimer for MacOS only: custom baudrates are not supported yet
  • 230400: use the -e speedhack option if you absolutely need 230400 at pc-side, but the DC will use 223214 or 260416 anyways.
  • 500000 and 1500000: you can try, but that will not work on all pc (the mismatch with the baudrate of the Dreamcast is sometimes too big (4%))

This page is a stub page. It needs to be expanded with more detail. If you know more information about this topic, please sign up and contribute to dreamcast.wiki!