KallistiOS GameCube: Difference between revisions
Jump to navigation
Jump to search
(Created page with "A KallistiOS port to GameCube is underway, led by darc. This page exists to serve as a general reference for KallistiOS GameCube related information until a better page can be created. ==Status== * Toolchain: Currently in PR (thanks pcercuei) * Changes needed to general KOS: few left, currently pending (thanks quzar) * GameCube arch: Not upstreamed yet (in progress by darc) ==Running homebrew== Most accessible methods for running homebrew (non-exhaustive): * Flipp...") |
(No difference)
|
Revision as of 19:54, 3 August 2025
A KallistiOS port to GameCube is underway, led by darc.
This page exists to serve as a general reference for KallistiOS GameCube related information until a better page can be created.
Status
- Toolchain: Currently in PR (thanks pcercuei)
- Changes needed to general KOS: few left, currently pending (thanks quzar)
- GameCube arch: Not upstreamed yet (in progress by darc)
Running homebrew
Most accessible methods for running homebrew (non-exhaustive):
- FlippyDrive: ODE + real disc drive combo, solderless, USD$50+ kit
- CubeODE: Replaces disc drive with ODE via SD slot, solderless, about USD$50
- PicoBoot: Overrides BIOS with gekkoboot homebrew bootloader, easy soldering required, DIY and very cheap
- PicoLoader: Emulates a disc drive to boot a main homebrew app then re-enables real disc drive, solderless, DIY and very cheap
- XenoGC: Allows disc drive to boot homebrew from DVD-R, requires moderate soldering, cheap
- Action Replay: Requires rare Action Replay disc to load files from SD card reader
- Save exploits