Using dcload-ip with Linux: Difference between revisions
No edit summary |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Linux: using dcload-ip with the BBA= | |||
This tutorial has been tested on a new Linux Mint 19.1 install and Windows Subsystem for Linux (WSL). My Dreamcast is connected directly to my computer, with no router in between, using dcload-ip with a hardcoded static IP address. | |||
This tutorial has been tested on a new Linux Mint 19.1 install and Windows Subsystem for Linux (WSL). My Dreamcast is connected directly to my computer, no router in between, using dcload-ip with a hardcoded static IP address. | |||
==Dreamcast side== | |||
Get a selfbooting version of | [[:File:Dcload-2022-12-17.zip|Get a selfbooting version of dcload-ip]]. I've burned this with [https://www.instructables.com/id/Dreamcast-Burn-Games-with-ImgBurn/ imgburn] without any problem. | ||
Next, boot | Next, boot '''dc-load-ip''' in your Dreamcast and make sure your BBA is connected in order to get your BBA MAC address. | ||
Once the green screen appears, note down your MAC address. It should look something like : | Once the green screen appears, note down your MAC address. It should look something like: <code>10:04:5d:2b:0f:4d</code> | ||
==Computer side (not necessary if using pre-built DHCP version)== | |||
We'll use the arp fonction to get your computer to "give" an IP address to your Dreamcast based on its mac address. In a terminal, enter: | We'll use the arp fonction to get your computer to "give" an IP address to your Dreamcast based on its mac address. In a terminal, enter: | ||
<syntaxhighlight lang="bash">sudo arp -s [IP address] [MAC address]</syntaxhighlight> | |||
*<code>[IP address]</code> is any valid IP address that you want to assign to your Dreamcast | |||
*<code>[MAC address]</code> is your dreamcast's MAC address, look at step 2. | |||
The IP address should be in the same range as your local network. In my setup, my ethernet port is set on port 192.168.5.100 and my <code>[IP address]</code> is 192.168.5.99. If you don't know your network range, you can use <code>ifconfig</code> in a terminal to find out. I won't cover this here. | |||
At this point, you should be able to see if your Dreamcast is connected. | At this point, you should be able to see if your Dreamcast is connected. | ||
| Line 25: | Line 21: | ||
A simple ping command should do the job. | A simple ping command should do the job. | ||
<syntaxhighlight lang="bash">ping [IP address]</syntaxhighlight> | |||
You should get a message like: ''64 byte from [IP address] .... blabla ... time=xx ms'' | |||
You | |||
==Testing your code== | |||
You can now use the dc-tool-ip program to send your file to the DC. Make sure your Dreamcast is running '''dc-load-ip'''. | |||
<syntaxhighlight lang="bash">dc-tool-ip -t [IP address] -x /path/to/your/.bin/or/.elf/file</syntaxhighlight> | |||
You can always run dc-tool-ip without any command to get some info on how to run it. | You can always run dc-tool-ip without any command to get some info on how to run it. | ||
The -c option is useful if you need to use files that are located on your pc. You can use them with the | The -c option is useful if you need to use files that are located on your pc. You can use them with the '/pc' path. | ||
==Notes (for non-DHCP use)== | |||
===arp=== | |||
The arp command used on step 3 will need to be entered every time you re log/shut down the dreamcast. I've added it to my | The arp command used on step 3 will need to be entered every time you re log/shut down the dreamcast. I've added it to my <code>environ.sh</code> script. | ||
===Adding a host name=== | |||
Also, you can add a line to your host file in order to replace [local IP address] to a more friendly name. | Also, you can add a line to your host file in order to replace [local IP address] to a more friendly name. | ||
<syntaxhighlight lang="bash">sudo nano /etc/hosts</syntaxhighlight> | |||
then adding the line: | |||
<code>dreamcast [IP address]</code> | |||
You can now refer to <code>dreamcast</code> instead of your usual <code>[IP address]</code> | |||
You can now refer | |||
Latest revision as of 23:31, 6 January 2023
Linux: using dcload-ip with the BBA
This tutorial has been tested on a new Linux Mint 19.1 install and Windows Subsystem for Linux (WSL). My Dreamcast is connected directly to my computer, with no router in between, using dcload-ip with a hardcoded static IP address.
Dreamcast side
Get a selfbooting version of dcload-ip. I've burned this with imgburn without any problem.
Next, boot dc-load-ip in your Dreamcast and make sure your BBA is connected in order to get your BBA MAC address.
Once the green screen appears, note down your MAC address. It should look something like: 10:04:5d:2b:0f:4d
Computer side (not necessary if using pre-built DHCP version)
We'll use the arp fonction to get your computer to "give" an IP address to your Dreamcast based on its mac address. In a terminal, enter:
sudo arp -s [IP address] [MAC address]
[IP address]is any valid IP address that you want to assign to your Dreamcast[MAC address]is your dreamcast's MAC address, look at step 2.
The IP address should be in the same range as your local network. In my setup, my ethernet port is set on port 192.168.5.100 and my [IP address] is 192.168.5.99. If you don't know your network range, you can use ifconfig in a terminal to find out. I won't cover this here.
At this point, you should be able to see if your Dreamcast is connected.
A simple ping command should do the job.
ping [IP address]
You should get a message like: 64 byte from [IP address] .... blabla ... time=xx ms
Testing your code
You can now use the dc-tool-ip program to send your file to the DC. Make sure your Dreamcast is running dc-load-ip.
dc-tool-ip -t [IP address] -x /path/to/your/.bin/or/.elf/file
You can always run dc-tool-ip without any command to get some info on how to run it. The -c option is useful if you need to use files that are located on your pc. You can use them with the '/pc' path.
Notes (for non-DHCP use)
arp
The arp command used on step 3 will need to be entered every time you re log/shut down the dreamcast. I've added it to my environ.sh script.
Adding a host name
Also, you can add a line to your host file in order to replace [local IP address] to a more friendly name.
sudo nano /etc/hosts
then adding the line:
dreamcast [IP address]
You can now refer to dreamcast instead of your usual [IP address]