Serial interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Dreamcast has a serial interface on the back of the console used for several peripherals and for console debugging. | The Dreamcast has a serial interface on the back of the console used for several peripherals and for console debugging. | ||
[[File:Serial Pinout.png|thumb|PCB Serial Port with Labeled Pins]] | |||
{| class="wikitable" | {| class="wikitable" | ||
|+Serial connector pinout | |+Serial connector pinout | ||
| Line 37: | Line 38: | ||
| +3.3V | | +3.3V | ||
|} | |} | ||
[[File:Serial Pads.png|thumb|Serial Connection Pinout for Test Points on Bottom of Board]] | |||
A SCIF loopback connection can be created to allow a Dreamcast to conduct and pass the SCIF test on the official Sega [[DC Checker]] diagnostics software by connecting pin 4 (RX2) to pin 5 (TXD) and connecting pin 6 (RTS) to pin 7 (CTS). | A SCIF loopback connection can be created to allow a Dreamcast to conduct and pass the SCIF test on the official Sega [[DC Checker]] diagnostics software by connecting pin 4 (RX2) to pin 5 (TXD) and connecting pin 6 (RTS) to pin 7 (CTS). | ||
{{DCWiki:Stub}} | {{DCWiki:Stub}} | ||
Revision as of 06:34, 30 December 2022
The Dreamcast has a serial interface on the back of the console used for several peripherals and for console debugging.
| Pin | Description |
|---|---|
| 1 | +5V |
| 2 | SCK |
| 3 | Ground |
| 4 | RX2 |
| 5 | TX2 |
| 6 | RTS |
| 7 | CTS |
| 8 | Ground |
| 9 | Reset |
| 10 | +3.3V |
A SCIF loopback connection can be created to allow a Dreamcast to conduct and pass the SCIF test on the official Sega DC Checker diagnostics software by connecting pin 4 (RX2) to pin 5 (TXD) and connecting pin 6 (RTS) to pin 7 (CTS).
This page is a stub page. It needs to be expanded with more detail. If you know more information about this topic, please sign up and contribute to dreamcast.wiki!