NetBSD/Dreamcast

From dreamcast.wiki
Jump to navigation Jump to search

NetBSD is a powerful, UNIX-based operating system with an official Dreamcast port. Earlier versions were partially maintained by Sega employees. NetBSD includes BBA support, Video Support and Keyboard support. Marcus Comstedt also maintained NetBSD/Dreamcast.

This article is a WIP. It is subject to rapid change. Beware!

Before building NetBSD, it's important to undertand release types and pick one of release, stable, or current types.

The example we'll follow here is using is using 10.0-release BETA.

In general, the instructions are made to be able to copy/paste, but read the text before and after the commands to make sure you understand them in case you need to adjust paramaters to your liking.

References: How to fetch NetBSD sources, How to build NetBSD

Building NetBSD source from scratch

Initial folder setup

Create a working directory in your home folder to hold everything, and enter it:

mkdir ~/netbsd
cd ~/netbsd

Create additional directories for files:

mkdir obj toolchain dest release src-tars xsrc-tars

Download files

Download all files from ftp.netbsd.org/pub/NetBSD/NetBSD-release-10/tar_files/src/ and place files into directory src-tars

Download all files from ftp.netbsd.org/pub/NetBSD/NetBSD-release-10/tar_files/xsrc/ and place files into directory xsrc-tars

Extract files

cd ~/netbsd
for file in src-tars/*.tar.gz; do tar -zxf $file; done
for file in xsrc-tars/*.tar.gz; do tar -zxf $file; done

Build toolchain

First, we need to build the cross-compiler to compile SuperH code on your desktop machine.

cd ~/netbsd/src
./build.sh -U -O ~/netbsd/obj -T ~/netbsd/toolchain -D ~/netbsd/dest -R ~/netbsd/release -j2 -m dreamcast tools

(-U is unprivileged, -O is where to store object files, -T is your toolchain directory, -D is the directory to place built NetBSD files, -R is the directory to place release files, -j is number of threads during build, -m is machine type, tools indcates you want to build toolchain)

Be sure to adjust -j to the number of threads you want to use depending on how many cores/threads your processor provides.

Build kernel

cd ~/netbsd/src/sys/arch/dreamcast/conf

If your target Dreamcast is modded with 32MB of RAM and you wish to build for that, open std.dreamcast and replace

options 	IOM_RAM_SIZE=0x01000000         # 16MB

with

options 	IOM_RAM_SIZE=0x02000000         # 32MB

You can pick GENERIC, GENERIC_MD (memory disk), or G1ATA kernel types. You can also copy one of them to a new file in the same dir and edit to configure your own kernel options for a custom kernel type. If you have a serial or USB coder's cable and want to run headless, or don't have a Dreamcast keyboard and want to use your computer keyboard for input, you may want to set options SCIFCONSOLE in your kernel config to communicate over serial connection.

Run nbconfig on your kernel config:

~/netbsd/toolchain/bin/nbconfig GENERIC

Enter the configuration directory:

cd ../compile/GENERIC

Then build dependencies and kernel:

~/netbsd/toolchain/bin/nbmake-dreamcast depend
~/netbsd/toolchain/bin/nbmake-dreamcast

netbsd.bin is your kernel file and Dreamcast executable (e.g. it can be sent over dcload-ip to boot NetBSD, or it can be scrambled and burned to CD-R as 1ST_READ.BIN).

cp netbsd.bin ~/netbsd/NetBSD-10.0_BETA-GENERIC.bin

You can repeat these steps to build multiple kernels.

Build userland

cd ~/netbsd/src
./build.sh -U -O ~/netbsd/obj -T ~/netbsd/toolchain -D ~/netbsd/dest -R ~/netbsd/release -j2 -u -m dreamcast release

(-u is update-only so we use what we've already built before instead of building another toolchain, and don't forget -j is number of threads during build)

Build X Server

cd ~/netbsd/src
./build.sh -U -O ~/netbsd/obj -T ~/netbsd/toolchain -D ~/netbsd/dest -R ~/netbsd/release -x -X ~/netbsd/xsrc -j2 -u -m dreamcast release

(-x is to build the X server, -X is the path of the X source code)

Output directories

  • ~/netbsd/dest will contain a copy of your NetBSD/Dreamcast userland.
  • ~/netbsd/release/dreamcast/binary will contain packaged copies of kernels and userland sets for resharing with others.

Kernel Options

NFS booting

options         NFS_BOOT_BOOTSTATIC
options         NFS_BOOTSTATIC_MYIP="\"192.168.0.100\""
options         NFS_BOOTSTATIC_GWIP="\"192.168.0.1\""
options         NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
options         NFS_BOOTSTATIC_SERVADDR="\"192.168.0.2\""
options         NFS_BOOTSTATIC_SERVER="\"192.168.0.2:/home/user/netbsdmount\""
options         NFS_BOOT_RWSIZE=1024