Building KOS on Cygwin

From dreamcast.wiki
Revision as of 22:02, 1 March 2023 by Unknown user (talk) (Created page with "This is the old Windows setup tutorial, taken from a forum post by Ph3nom. Since then a new tutorial was written that uses MSYS2 instead. == Cygwin setup == # Install Cygwi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is the old Windows setup tutorial, taken from a forum post by Ph3nom. Since then a new tutorial was written that uses MSYS2 instead.

Cygwin setup

  1. Install Cygwin 32bit, setup-x86.exe from here http://cygwin.com/install.html
  2. Click next twice, making sure to install from internet.
  3. Choose install directory. I chose d:\cygwin. Click next.
  4. Choose download directory. Does not affect install directory. Click next 3 times.
  5. Chose packages to install. I chose Devel, Libs, and Utils. Cyg01.jpg
  6. Click next. When the download and install is completed (this can take some time), Cygwin should be good to go.

Toolchain (cross-compiler and libraries)

  1. Run 32bit Cygwin Terminal as administrator Cyg02.jpg
  2. Download kos-2.0.0-src.tar.gz from here http://sourceforge.net/projects/cadcdev/files/kallistios/2.0.0/
  3. Create a folder /dc/ in your /Cygwin/usr/local/ folder
  4. Create a folder /kos/ in your /Cygwin/usr/local/dc/ folder
  5. Extract the contents of /kos-2.0.0-src/ into your /Cygwin/usr/local/dc/kos/ folder
  6. Download this patch and extract into your dc-chain folder
  7. In cygwin, navigate to your dc-chain folder. Since I installed the chain on my d:, my command is $ cd d:/cygwin/usr/local/dc/kos/utils/dc-chain
  8. Download the libs needed by dc-chain by running the script with this command: $ ./download.sh
  9. Extract the libs needed by dc-chain by running the script with this command: $ ./unpack.sh
  10. Patch the default kos install by running the script with this command: $ ./patch.sh
  11. Build the dc-chain with this command $ make

KOS

  1. Download this environ.sh and extract into your /Cygwin/usr/local/dc/kos/ folder
  2. Navigate to your kos directory in Cygwin. Since I installed the chain on my d:, my command is
$ cd d:/cygwin/usr/local/dc/kos
  1. Configure your environment by running this command:
$ . ./environ.sh
  1. Build KOS by running the command
$ make


That's All! When kos is built, you are ready to start compiling your own code for the Dreamcast using Kos 2.0 and GCC 4.7.3.